- Epoxy Fix Super Strong is recommended when very high bond strength is required
- It is 150% stronger than normal super glue tested on metal
- This two – component gap filling resin adhesive dries clear to slight yellow color and provide tough and durable bonds on most materials in common use
- Does not bond polypropylene or polyethylene
- Super Strong sets in approximately 6 – 8 hours
- High bond strength is attained after 3 days.
- Suitable for :- Porcelain - Metal - Wood - Marble - Concrete - Pottery - Rigid plastics
Direction :
- Surfaces to be repaired should be clean, dry and free from grease. For best adhesion, scrape and sand the surfaces and clean with acetone.
- Unscrew caps of each tube and pierce with own cap to avoid contamination. Dispense equal amount of resin and hardener (Part A and B) onto a clean disposable surface and mix thoroughly. The mixture will remain usable for 3 – 4 minutes.
- Apply surfaces to be repaired and allow to harden.
- To reseal, wipe nozzles clean and replace caps to original tube (colour coded), or hardening may occur in tube nozzle.