Knead it multipurpose epoxy putty is a fast-setting polymer compound that enables permanent repair to many surfaces. The modelling-clay like material eliminates drips and runs, facilitates adhesion to the substrate and allows the material to be shaped and formed as needed before curing begins. Once cured, it can be drilled, screwed, sawn, sanded, or painted. Suitable for interior or exteror use.
 |
- Wood/Timber
- Concrete
- Anchoring bolts
- Metal
- Masonry
- Plastics
- Ceramics
|
|
|
 |
- Will not sag, run or drip
- Easy to use - no mess
- Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
- Good adhesive strength
- Can be used to reshape, rebuild and repair a multitude of surfaces and applications
- Good gap filling properties
- Long-lasting, durable solution
- Heat resistant to 120°C continuously or 140°C intermittently
- Can be used under water. (but dry surfaces for application are best and recommended)
- Rapid set time (<10 minutes)
- Excellent anchoring properties
|
|
|
 |
- Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
- Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
- Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
- For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
- Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
- After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
- After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
- Wash hands thoroughly with soap and water before product hardens.
|
|
